HAMPTON BAY 91315 Guía De Uso Y Mantenimiento página 12

Assembly - Attaching the Fan Blades
12
Attaching the fan blades
NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates your decor.
□
Attach the blade (G) to the blade bracket (H) and the blade
medallion (I) using the blade attachment screws (AA). Start
a blade attachment screw (AA) into the blade bracket (H).
Repeat for the two remaining blade attachment screws (AA).
□
Tighten each blade attachment screw (AA) securely.
AA
Assembly - Attaching the Light Kit
14
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove one screw (N) from the black bracket below the
fan-motor assembly (E). Loosen, but do not remove the
other two screws.
□
Connect the blue wire exiting the bottom of the fan-motor
assembly (E) with the black wire from the top of the light
kit fitter assembly (F).
□
Connect the white wire exiting the bottom of the fan-motor
assembly (E) with the white wire from the top of the light
kit fitter assembly (F).
□
Attach the light kit fitter (F) to the fan-motor assembly (E)
by securing them with the two screws (N) loosened in the
first step. Push the light kit fitter assembly (F) up to engage
the screw heads in the screw slots and turn to secure.
Tighten each screw firmly.
13
Attaching the blade assemblies
□
Attach the blade assembly to the fan-motor assembly (E) by
first inserting the blade assembly into the slot in the side of
the fan-motor assembly (E).
□
Insert a blade bracket screw with lockwasher (BB) into the
blade bracket (H). Repeat for the one remaining screw.
□
Tighten each blade bracket screw with lockwasher (BB)
securely.
□
Repeat these steps for the remaining blades (G).
H
G
I
E
12
E
H
BB
N
F