Operating The Fan; Care, Cleaning, And Maintenance - Impecca FanFair FBF-700 Guia Del Usuario

OPERATING THE FAN

1. Set the fan on a level and dry surface.
2. Make sure the switch is in the OFF (center) position.
3. Plug the power cord into the socket.
4. To operate the fan, push the switch to the left for Low speed or to the right for High
speed. The center position ofthe switch is the OFF position.
5. After turning the fan off, always be sure to unplug it from the electrical outlet.

CARE, CLEANING, AND MAINTENANCE

Be sure the fan switch is in the "OFF" position and unplugged before cleaning.
• Use only a soft, damp cloth to gently wipe the fan. To clean inlet and outlet ribs,
use a common household vacuum.
• DO NOT immerse the fan in water and never allow water to enter the
Motor Housing.
• DO NOT use gasoline, paint thinner or other abrasive chemicals to clean the fan.
7