QDI WinneX3 Manuel De Instrucciones página 7

SpeedEasy Quick Setup
Proced ures :
1. Correctly insert the Intel
2. Plug in other configurations and restore the system.
3.
Switch on power to the system and press the <Del> key to enter BIOS Setup.
4. Enter " CPU SpeedEasy Setup" menu to set up the CPU speed.
Note: If you do not set the CPU speed, your system will run at the default
setting (266MHz for processor with 133MHz host bus speed,
200MHz for processor with 100MHz host bus speed, 133MHz for
processor with 66MHz host bus speed, for bus ratio locked proces-
sor, run its real speed.)
5. Save and exit BIOS Setup, your system will now boot successfully.
® ® ®
Pentium III/Pentium II/Celeron™ Slot 1 processor.
Manual for WinneX 3
WinneX 3
S.1