Safety Advice - BETTE SENSORY Instrucciones De Uso

Instruction for use BETTESENSORY
Art. no. B631

Safety advice

The electrical connection is achieved with a line voltage of 230 V whereby VDE 0100 Part 701 Low-voltage elec-
trical installations must be observed. The relevant country-specific regulations and standards must be observed.
Assembly may only be performed by approved specialist technicians using the assembly instructions and in com-
pliance with the applicable rules and safety regulations. After commissioning and functional testing, this docu-
ment must be handed over to the system's user for future reference. The control functions must be explained.
Danger!
Risk of death through electric shock hazard!
Switch off the mains voltage before opening the casing. Only approved specialist technicians may perform work
on the electrical components.
Note:
1 The drain valve is open when de-energised (e.g. during installation).
In this state the manual sealing mechanism (click valve) cannot be opened.
2 During commissioning (connection to mains) the valve closes. The manual sealing mechanism (click valve)
can be opened.
3 Whilst the bath is being filled, the user must monitor the system.
Seal only for the BETTELUX SHAPE bath, remove for all other bath models
*
2
INT