Operation Procedure - Magic Chef MCD1611ST Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3- pronged 15 Amp, 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
The oven light is on when the microwave oven
is operating or the door is opened.
2
If the oven door can be opened at any time
during operation, the oven will automatically
shut off.
3
Each time a pad is pressed, a BEEP will sound
to acknowledge the press.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show ":0" when the oven is
plugged in.
6
Time clock returns to the present time when
the cooking time ends.
When the STOP/CLEAR pad is pressed during
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch POWER pad
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
7
the oven operation, the oven stops cooking and
all information is retained.
To erase all information (except the present
time), press STOP/CLEAR pad once more. If
the oven door is opened during the operation,
all information is retained.
If the START pad is pressed and the oven does
8
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely.
The oven will not start cooking until the door is
completely closed or the program has been
reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Power Level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
8
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido