Kohler K-1209 Diagrama De Instalación página 2

16"
(40.6 cm)
1-11/16"
(4.3 cm)
3"
(7.6 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in
3-side integral tile flange, left drain
3-side integral tile flange, right drain
Fixture*:
Bathing well:
Basin area, bottom 47" (119.4 cm) x 20" (50.8 cm)
Basin area, top 53" (134.6 cm) x 23" (58.4 cm)
Weight 100 lbs (45.4 kg)
To overflow:
Water depth 14-1/2" (36.8 cm)
Capacity 64 gal (242.3 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Pump: V
1-speed 120
Minimum access panel (required):
20" (50.8 cm) W x 15" (38.1 cm) H
1013795-1-B
8-11/16" (22.1 cm)
60" (152.4 cm)
2-7/8"
1" (2.5 cm)
(7.3 cm)
3"
(7.6 cm)
K-1209
K-1209-L
K-1209-R
Hz A
60 7.5
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Recommended Faucet Area
Pump/Control Access
(If Apron Is Not Used)
20" (50.8 cm) W x
15" (38.1 cm) H
32" (81.3 cm)
18-1/2"
20"
(47 cm)
(50.8 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
50 lbs/square foot (242 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral
Flange Detail
1-1/2"
(3.8 cm)
Drop-in Rim
Detail
120 V, 15 A, 60 Hz
Kohler Co.