T-Fal Eole Crystal Instructivo De Operación página 5

The "A" "B" and "C" buttons described below are only operational once the appliance has
been turned on and can be used simultaneously (see page 2).
• "A" button, oscillation control:
- Press the "A" button once, the fan oscillates horizontally.
- To stop the oscillation function, press the "A" button again.
• "B" button, set automatic appliance shutdown:
You have 4 choices, 1-, 2-, 4- or 8-hour operating time.
- Press the "B" button once; the 1-hour timer is activated and the 1h indicator comes on.
- Press the "B" button a second time; the 2-hour timer is activated and the 2h indicator comes on.
- Press the "B" button a third time; the 4-hour timer is activated and the 4h indicator comes on.
- Press the "B" button a fourth time; the 8-hour timer is activated and the 8h indicator comes on.
- To stop the "TIMER" function, press the "B" button again.
1
h our
• "C" button, set VARITION or REDUCTION mode
Random speed cycles (90-second cycles) +
Pre-select speed
Pre-select speed
Pre-select speed
Pre-select the start-up speed according to your needs (see table above), then select
REDUCTION mode or VARIATION mode (using method described below):
- Press the "C" button once; "VARIATION" mode is activated and the "VARIATION" indicator
comes on.
- Press the "C" button again; "REDUCTION" mode is activated and the "REDUCTION" indicator
comes on.
- Press the "C" button again to stop this function.
2
ho ur s
S TOP
VARIATION :
/
/
/
4
hou r s
Random speed cycles (90-second cycles) +
Speed steps down every 30 minutes
Pre-select speed
V AR IA TI ON s p ee d
0
Pre-select speed
vari at io n
sp ee d
va ri a ti on
sp ee d
0
30
min.
Pre-select speed
vari at i on
spee d
va ri a ti on
sp ee d
0 30 60
min.
2
8
hours
REDUCTION :
/
/
/
va ri a ti on s p ee d
min.
EN