GE 86712 Manual Del Usuario página 4

Changing your Cover Plate:
1. Place the headset in your left hand
between thumb and index finger. The
microphone should be pointed inwards
towards your palm.
2. Using your right hand, place your
thumb on the pointed end of the face
cover and press down while pulling
backwards until the face cover snaps
out of place. Remove cover. This takes
a little bit of pressure.
3. Install the new face cover by inserting
the pointed end in a slight angle first and
then snap into place by pushing inward
towards your left hand at the wide end of
the face cover.
4. After the front has snapped into place,
press downwards on the wide end to
snap it into place.

Changeable Face Plate
Function Button