G-Clean FoamBlaster AGPWF04 Manual Del Usuario página 2

using the FoamBlaster
See Figure 3.
Warning:
Do not make adjustments while using the pressure
washer. Stop spraying and lock out the trigger before
making adjustments. Keep hands away from nozzle tip
when spraying.
n The amount of detergent in the spray is controlled by the
detergent flow lever.
• Push the lever all the way forward to use the detergent
at its highest concentration.
• Pull the lever all the way back to spray water only.
n Choose between two different water spray patterns:
When rotated to this symbol, the spray nozzle
provides a jet spray. Use this setting for apply-
ing detergent to items at a distance such as
second story siding.
When rotated to this symbol, the spray nozzle
provides a fan spray. Use this setting for apply-
ing detergent to items such as decks, patios,
outdoor furniture, etc.
note: When pointing the spray wand upward, water may
discharge from the sides of the spray wand nozzle. To stop
this discharge, point the spray wand downward for five
seconds and then resume normal operation.
g-clean FoamBlaster
maintenance
n Before storing the foamer attachment, rinse to remove
any detergent residue and allow to dry completely.
techtronic industries north america, inc.
attachment
™
attachment
™
Pickens, SC 29671
1-866-340-3912
spray nozzle
spray patterns
Hwy 8
Detergent
flow lever
Fig. 3
987000-712
3-31-10 (REV:02)