Operation - GreenWorks Pro IV60A00 Manual Del Operador

OPERATION INSTRUCTIONS
NOTE: This product requires no assembly.
1. Insert the battery pack (A) into the power inverter.
2. Press the switch (B) to ON position.
3. Connect the USB (C) or plug (D) to the receptacle.
Note: To remove the battery pack, press the battery release button (E) on the power inverter.
W A R N I N G :
Shut off the power source, or disconnect the battery when the power inverter is not in use.
The LED lights indicate the working condition of the power inverter as follows:
Work condition
Normal
High-voltage protection
Overload protection
Battery error
Low battery voltage
Short-circuit protection
Low-voltage protection
Over temperature protection
E
A
C
Green
B
D
Red
Red light flashes in intervals of 4.
Red light flashes in intervals of 5.
Red light flashes in intervals of 6.
7