Shenzhen Creative Industry Co. Oxy-One Plus Modo De Empleo página 61

the Oximeter. When you want to change the
Oximeter's display direction, if you move the
Oximeter too slowly, the movable metal ball will
also move slowly because of not enough
acceleration.
orientation
Acceleration needs to be provided to the
orientation-sensor
orientation change.
 Nail polish may affect the measuring accuracy, and
too long
measurement or inaccurate result.
 Existence of high intensive light sources, such as
fluorescence light, ruby lamb, infrared heater or
strong sunshine, etc. may cause inaccuracy of
measurement result. Please put an opaque cover
on the sensor or change the measuring site if
necessary.
 If the first reading appears with poor waveform
(irregular or not smooth), then the reading is
unlikely true, the more stable value is expected by
waiting for a while, or a restart is needed when
necessary.
Consequently
detection
for
fingernail
10
the
would
quick
may cause
response
be delayed.
sensing
failure
of
the
of