Philips HF8430/01 Manual De Instrucciones página 9

The actual operating time may vary over time, depending on the selected
vibration mode and speed.
Charge the massager when the light ring starts flashing slowly to indicate
that the battery is almost empty.
1 Insert the small plug into the charger and put the adapter in the
wall socket.
 Place the massager on the charger. It only fits properly on the
charger with the buttons facing up. (Fig. )
The massager switches off automatically when you place it on the charger.
Note: Make sure the pre-warming function is switched off when you charge
the appliance (see chapter 'Preparing for use').
Note: The charger does not work when the massager is placed incorrectly.
During charging the light ring flashes.
,
Note: When you charge the massager for the first time or after a long period
of disuse, it may take a few minutes before the light ring starts flashing. This
is normal
Note: The appliance may produce a smell the first few times you charge it.
This is normal.
When the battery is fully charged, the light ring goes out.
,
candlelight set
Charge the candlelight set for 12 hours.
When the candles are fully charged, they have an operating time of
approx. 24 hours.
1 Insert the small plug into the charger and put the adapter in the
wall socket.
The charging light on the charger goes on (Fig. ).
,
 Put one or more candles on the charger (Fig. ).
When the candles are fully charged, the charging light on the
,
charger goes out and the charging process stops.
EnglisH
9