Hama Black Force Wireless Manual De Instrucciones página 3

g Operating Instruction
I. Introduction
Thank you for choosing the „Hama Black Force Wireless
PS3 Gamepad" and congratulations on your decision.
We are sure that our product will provide you with a
great deal of gaming pleasure for years to come.
This quick guide contains valuable information on
operating and configuring the gamepad. Please keep
the instructions in a safe place for future reference.
II. Product Features
• 12 programmable buttons
• 2 360° analogue sticks including key function
III. Hardware Installation
1. Connect the enclosed wireless receiver to the
USB port on your PS3.
2. Then press the „Home" button. The gamepad should
normally be detected by your PS3.
3. To charge the PS3 controller, connect it to your PS3
using the included USB cable.
IV. Notes
1. If some buttons do not work in a game, check the
button assignment in the options menu.
They can often be configured there as well.
Also refer to the manual of the game in question.
V. Safety Instructions
1. Do not attempt to service or repair the device
yourself. Leave any
service work to the responsible qualified
technicians.
2. Do not modify the device in any way.
Doing so voids the warranty.
VI. Contact and Support Information
If the product is defective:
Contact your retailer or Hama Product Consulting if you
have any product claims.
Internet/World Wide Web
Product support, new drivers and
product information is available at
www.hama.com
Support Hotline – Hama Product Consulting:
Phone: +49 (0)9091/502-115
Fax: +49 (0)9091 502 272
E-mail: produktberatung@hama.de
3