Philips ADR810 Manual De Instrucciones página 13

4 Collision
Detection
5 Date/Time
6 LCD Auto
Off
7 Format
8 Language
9 Voice
Recording
10 EV Value
11 Date Stamp
12 Motion
Detection
13 Driver
Fatigue
Alert
14 Default
15 About
Select the level of event detection sensitivity to high sensitivity/
middle sensitivity/low sensitivity/off.
The Collison Detection function will automatically detect
any collision events, and create an emergency video clip. The
emergency video clip will show 30 seconds before and after
the event detection. The video file will be saved into the
Emergency Record folder.
Set date and time for the device
Set the time before the monitor is turned off automatically, or
set the monitor always on.
Format your TF card(Micro SD). Please format your card using
the device before you use it for the first time.
English, French, German, Italian, Spanish, Portuguese, Polish
and Russian.
Switch on/off voice recording function.
Manually adjust the exposure level.
Switch on/off date and time marking on the video.
Switches to ON to trigger Motion Detection mode.
the function will detect movements in the field of front view.
When any movement is detected, continuous 20 seconds
recording starts immediately. if any movement is detected in
the 20 seconds, recording will last additional 20 seconds from
the trigger time.
Switch on/off driver fatigue alert function.
Reset all device settings to factory default settings.
Firmware version, and related product information.
13