Tabla de contenido
Publicidad
English
Assembly Instruction
1.
Remove all parts from box.
2.
Lay top of stand with the bottom side up on a soft surface to avoid scratching
top.
3.
Screw 4 upper legs into place.
4.
Position base on top of the 4 upper legs with the bottom side up.
5.
Screw 4 lower legs into place.
6.
Thread one (1) nut on each threaded end of the metal dividers. You will use
four (4) nuts total in this step.
7.
Place the metal dividers through the holes in the base with the angles side of
the dividers towards the front of the stand.
8.
Thread one (1) nut on each threaded end of the metal dividers to hold the
dividers into place.
3
Publicidad
Tabla de contenido
