METRICA 60719BM Manual Del Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

X1
10
X1 - beam
X2 - beam
50 m (approximately)
After putting the device into operation, measure h1. Loosen the
screw on the tripod and turn the device by 180 °; now measure
h1
h2 on the wall. The value D, difference between h1 and h2, must
be less than 10 mm. Measure the Y-axis in the same way.
h2
D-value between h1 and h2 ought to be less than 10mm.
Check the Y-beam in the same way.

Publicidad

Tabla de contenido
loading

Tabla de contenido