Kohler K-8033 Guia Del Usuario página 4

Installed Cover
Setscrew
Removing/Reinstalling the Speaker Cover
The speaker cover can be removed for ease of cleaning.
Removing the Cover
Using the hex wrench provided with your speaker, thread the
setscrews clockwise into the speaker assembly until the setscrew
clears the hole in the cover.
Pull the bottom of the cover out and lift up to remove from the
speaker assembly.
Cover can be cleaned and reinstalled. Use care to avoid direct
spray into the speaker assembly.
Reinstalling the Cover
Hook the top edge of the cover into the grooves in the top of the
support. Verify the holes in the bottom of the cover align with the
setscrews.
To secure the cover, unthread the setscrews through the holes in
the cover until the setscrews are just past flush with the surface of
the cover.
1070937-5-A
Turn setscrews clockwise
to remove the cover.
Turn setscrews counterclockwise to
secure the cover.
Underside View of Cover
4
Setscrew
Kohler Co.