Hama Digital Ball Manual De Instrucciones página 8

Turn Off
1. Press " " while viewing photo to enter Main Menu.
2. Select "Off" by press " " again to turn off the system
Or Slide "On / Off" to "Off" position.
Using the PohtoViewer Software
After the Digital Photo Ball been turned on and connect
to your PC , the PhotoViewer software will pop-out
automatically. The PhotoViewer software allows you to
easily edit and manage the images on your Photo Ball.
Noted:
• If the PhotoViewer software does not pop-out
automatically, please enter "My Computer" , select
the flash driver icon of Digital Photo Ball and double
click "Photoviewer" icon to open the PhotoViewer
software manually.
• The PhotoViewer software WILL NOT OPERATE if the
Photo Ball is not connected to the computer.
The User Interface
1. File Browser: This part of the PhotoViewer interface
allows you to explore your computer and select
images to copy onto your Photo Ball.
2. Image Preview: In this window you can review and
modify the images before transferring them onto your
Photo Ball.
3. Image Cue: When you first start the PhotoViewer
software, this area displays the images currently
stored on the Photo Ball. When you add or remove
images to the Photo Ball, your changes will be shown
here. While you're working, no changes are made to
the files on the Photo Ball until you confirm them (see
below).
Add Photos
Using the standard Windows menu in the top left of the
main Digital Photo Ball menu you can browse any folder
on your computer to see all the photos in the selected
folder.
1. Press "Select files" button to add the photo(s) into the
Digital Photo Ball software, you can use "del" or "Del
All" to delete the selected photo(s) from the software;
2. To add more than one photos at one time, select the
photos, push "Batch" button to save the photos into
Digital Photo Ball album;
3. To add one image, select the image, press "selection"
button at bottom left, and adjust the display region.
Press "add " arrow to save the selected photo into
Digital Photo Ball album;
4. Press "Sync" to download the photos in album onto
the Digital Photo Ball;
5. Then you can unplug the Digital Photo Ball and view
your favorite photos.
Note: This Digital Photo Ball is built-in 8M memory
which can store up to 70 photos, since the resolution
difference of source photo, the stock number may more
or less than 70;
Delete Photos
1. All photos in Digital Photo Ball will displayed in album
after connection;
2. Press "x" icon to delete photo;
3. Press "download", the deleted photos will be
permanent removed from the Digital Photo Ball.
Save Photos
You can save the photos in Digital Photo Ball's album to
your PC by pressing "Save" button.
The selected photo will save in "BMP" format.
Rotate Photos
1. Press "Rotate left" to rotate the selected photo
anticlockwise;
2. Press "Rotate right" to rotate the selected photo
clockwise.
Disconnection
After download the images, Click the "Safely Remove
Device" icon on the Task Bar, Remove the device follow-
ing the guide.
Note: Attempting to disconnect the Digital Photo Ball
without using the "Safely Remove Device" procedure
may cause the files in the memory to be unreadable.
File Browser
Image Preview
Maintenance
1. Do not expose this appliance to rain or moisture.
2. Keep your Digital Photo Ball out of sunlight. Direct
sunlight may cause damage.
3. Do not open the case of the Digital Photo Ball; there
are no user serviceable parts inside. Opening the
case will void your warranty.
4. Your Digital Photo Ball is a complicated electronic
device and cannot withstand shock from drops.
Image Cue
7