Cooper Lighting Metalux OHB Instrucciones De Instalación página 2

Installation Instructions – OHB Single Point Mounting Kits
Step 1. Fasten hook (or other accessory) to retainer.
Tighten set screw according to orientation
required.
Figure 1.
Step 2a. Lock one side first into slot.
Figure 2a.
Step 2b. Lock other side into slot.
Figure 2b.
2
COOPER LIGHTING SOLUTIONS IB507013EN Installation instructions
Step 3. Fasten hanger with carriage bolt and nut
provided.
Figure 3.
Step 4. If there is a need to create an enclosure, install
the covers provided in the kit.
Figure 4.
Step 5. Install V-Hanger from at least one end of fixture
against the structure.
Figure 5.