General Information; General Instructions; Mx37; Operating - Girmi MX37 Manual De Uso

- Keep the appliance and its cord out of reach of children
less than 8 years.
If the power cord is damaged, or in case of failure and / or
malfunction do not tamper with the unit. The reparation
must be done by manufacturer or by service center
authorized by the manufacturer in order to prevent any
risk. Failure to comply with the above may compromise
the unit safety and invalidate the warranty.
- This appliance is intended to be used in household and
similar applications such as: staff kitchen areas in shops,
offices and other working environments; by clients in
hotels, motels and other residential type environments;
farm houses, bed and breakfast type environments.
- The appliance is not intended to be operated by means of
an external timer or separate remote-control system.
- Before every use, unroll the power cord.
- Use original spare parts and accessories only.
- Do not subject the product to strong impacts, serious
damages may result.

GENERAL INSTRUCTIONS

The blades of the hand blender are very sharp to chop: Be careful not to cut yourself during cleaning
operations and/or when removing the attachments.
- Before using for the first time, carefully wash the parts that will be in touch with food: shaft and blades.
- To avoid the overheating of the motor, do not use the appliance running continuously for more than 30
seconds, then make at least 5 minutes rest. Do not use the product without food.
- Do not insert your fingers inside the bowl while the mixer is running.
- Before operating the appliance, check that all the parts are correctly installed.
- Never leave the appliance unattended while it is running.
CAUTION! Unplug the unit from the socket before touching the blades for any reason, such as
cleaning or foods removing. CAUTION! Always unplug unit from electrical outlet each after use
and/or before touching blades and/or before installing or removing any accessory or attachment.
- To clean the immersion cone and the accessories, it is recommended using warm tap water and containing
the use of detergents. When gleaning with detergents, rinse thoroughly.
- Do not immerse the top of the mixer in water or other liquids, clean it with a damp cloth.
PARTS MX37
1. Speed regulation botton

OPERATING

- Assemble motor housing to the immersion stainless-steel shaft as described in the "Assembling the shaft"
section. Plug the unit to the electrical outlet.
2. Motor body 3. Immersion shaft 4. Blades
8