Habitat Baci Manual De Instrucciones página 2

EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Mod.A:
Cover (Velvet): 100% polyester + corrected calfskin leather.
Mod. B:
Cover (Lecce): 36% cotton, 26% acrylic, 16% viscose, 10% polyamide,
7% wool, 5% linen + corrected calfskin leather.
Mod.C:
Cover (Fasoli): 36% cotton, 32% acrylic, 24% viscose, 8% polyester +
corrected calfskin leather.
Mod. D:
Cover (Bellagio): 51% cotton, 28% viscose, 7% linen, 7% polyester,
6% acrylic, 1% polyamide + corrected calfskin leather.
Mod. E:
Cover (Copparo): 100% polyester + corrected calfskin leather.
Cover of base and armrest: corrected cow leather.
Structure of seat: metal powder painted.
Structure of back: solid pine, particleboard, hardboard.
Structure of armrest: solid pine, particle board, fiberboard based on
metal armrest frame powder painted.
Padding of the seat cushion: HR foam 28-31kg/m³, mix of 80%
granulated foam and 20% duck feathers.
Padding of the back cushion: 100% silicone fiber balls.
Padding of armrests: polyurethane foam 28-31kg/m3 and
300g wadding.
Suspension of the seat: zig zag springs.
Suspension of backrest: rubber belts.
Feet: steel powder painted.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Maintenance
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...) nor
a moisture source. The heat and humidity can damage the product.
Do not use abrasives.
Fabric coating
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dabbing
to absorb the liquid. Do not rub, it may damage the fabric. Variations
in color between the surfaces cleaned and uncleaned might appear.
For the cover of cushions, only dry cleaning.
Baci - 06/2021
Leather coating
Do not sit on the leather with damp or wet clothes.
Clean every 2 months with a slightly damp soft cloth. Then wipe with
a dry cloth.
Use a cleaning kit for upholstery leather.
Feeding the leather regularly so that it keeps its flexibility.
If in doubt, call a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case of
BC
complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1