Klauke AHP 700-L Manual De Instrucciones página 30

Instruction Manual Battery-hydraulic Pump
AHP 700-L
Index
1. Introduction
2. Warranty
3. Description of the electro-hydraulic pumping unit
3.1 Description of components
3.2 Brief description of the important features of the unit
3.3 Description of the tool indication
3.4 Description of crimping cycles
3.5 Description of cutting cycles
3.6 Description of punching cycles
3.7 Description of the function of the pump in conjunction with the bus bar tool centre
3.7.1 Working with the bending dies
3.7.2 Working with the cutting dies
3.7.3 Working with the punch dies
3.8 Description of reading procedure
4. Remarks in respect of the determined use
4.1 Operation of the unit
4.2 Explanation of the application range
4.3 Oil changing and maintenance cycles
4.4 Reference, as to which (spare-) parts can be exchanged by the customer
5. Troubleshooting
6. Technical data
7. Putting out of service/waste disposal
Abb. ähnlich / pic. similar
WORK
HE.14138_H © 09/2011
SERVICE DON´T DO
General
safety rules
GB
1