Tv And Radio Channels Setting; Automatic Search - LEXIBOOK DMPTV1FR Modo De Empleo

The mini TV is not compatible with radio channels in AC3 format.
Note:
This section describes how to search and receive TV and radio channels.
1. Press the Menu key to enter the main menu.
2. Press the CH+ or CH- keys to select "Digital TV" then press Enter.
3. Press the CH+ or CH- keys to select "Installation" then press Enter.
4. Press the CH+ or CH- keys to select "Auto Search", "Manual Search" or "Area
Search" then press Enter.

Automatic Search

The automatic search function will scan the default frequencies and bandwidths
according to the country setting (refer to the "Country setting" paragraph of the "Mini
TV settings" section).
The TV will automatically store the channels available. Select "Auto Search" and
press Enter to start the TV and radio channels automatic search.
Note: You can exit the automatic search at any time by pressing the Exit key.
Manual Search
To use the manual search function, you must know the frequencies and bandwidths
you want to use for the scan.
1. Select "Manual Search" and press Enter.
2. Press the CH+ or CH- keys to select "Freq (KHz)" then use the numeric keys on
the remote control to enter a frequency.
3. Press the CH+ or CH- keys to select "BandWidth" then use the < or > keys to
choose a value for the bandwidth (in MHz) : "6M", "7M" or "8M".
4. Press Enter to start the search or Exit to go back to the installation menu.
Area Search
This option allows you to make a more precise manual research by indicating a
frequency for the beginning and the end of the search. The unit will complete the
search between the two frequencies you entered.
1. Select "Area Search" and press Enter.
2. Press the CH+ or CH- keys to select "Start Freq (KHz)" then use the numeric keys
on the remote control to enter a frequency for the beginning of the search.
3. Press the CH+ or CH- keys to select "End Freq (KHz)" then use the numeric keys
on the remote control to enter a frequency for the end of the search.
4. Press the CH+ or CH- keys to select "BandWidth" then use the < or > keys to
choose a value for the bandwidth (in MHz) : "6M", "7M" or "8M".
5. Press Enter to start the search or Exit to go back to the installation menu.
IMPORTANTE NOTE: To be able to launch a channel search (auto, manual or by area),
you must connect the mini TV to an antenna (your outdoor antenna, the portable antenna
provided with the unit or other).
32

TV AND RADIO CHANNELS SETTING