Pleasant Hearth 23-29-65 Manual Del Usario página 26

ASSEMBLY INSTRUCTIONS
5. Insert two bolts (AA) through flat washers (BB),
lock washers (CC), predrilled holes in edge
blocks and into predrilled holes in base (C).
Tighten with Phillips screwdriver (not included).
Repeat on opposite side.
Hardware Used
AA Bolt
Flat Washer
BB
CC
Lock Washer
6. Lay assembly on its back. Insert four bolts (AA)
through flat washers (BB), lock washers (CC),
predrilled holes in edge blocks and into predrilled
holes on right side of assembly as illustrated.
Tighten with Phillips screwdriver (not included).
Repeat on opposite end.
Hardware Used
AA Bolt
Flat Washer
BB
CC Lock Washer
5
x 4
x 4
x 4
6
x 8
x 8
x 8
6
C
CC
BB
AA
AA
BB
CC
CC
BB
AA