Technical Data; Noise Information; Vibration Information - Ratio PRO XF 45J Manual De Instrucciones

TECHNICAL DATA

Type PRO XF45J (PDH-designation of machinery, representative of DEMOLITION HAMMER)
Voltage
Power input
Impact rate
Impact energy
Protection class
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K
PA
K
WA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN
60745:
Mode description
chiseling
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:How the tool is used and the materials being cut
or drilled.
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
26
Vibration emission value
a = 11.69 m/s (main
2
h,Cheq
handle)
a = 10.82 m/s (auxiliary
2
h,Cheq
handle)
230-240V ~ 50Hz
L : 81.74 dB(A)
pA
L : 105 dB(A)
wA
Uncertainty K
K = 1.5 m/s²
1750W
1380bpm
45J
/II
18.7Kg
3.0 dB(A)
4.12 dB(A)