resideo W8735ER Instrucciones Para La Instalación página 7

Table 4. Programming Parameters.
Aquastat
HL_ High Limit.
Hdf High Limit Differential.
LL**_ Low Limit.
Ldf Low Limit Differential.
ELL***
ZR input configured as External Low Limit (ON/OFF)
duu ZR input configured as external Domestic Hot Water
(DHW) request (ON/OFF)
ASC Anti Short Cycle Timeout (seconds); "OFF" is
disabled.
otL Outdoor Temperature Low (minimum) parameter for
the outdoor reset curve (°F or °C)*
otH Outdoor Temperature High (maximum) parameter
for outdoor reset curve (°F or °C)*
btL Boiler Temperature Low (minimum) parameter for
outdoor reset curve*
bP Boost Period (minutes). "OFF" is displayed if Boost
is inactive*
bS Boost step (°F or °C) shown only if Boost is active
(bP=ON)*
UUS Warm Weather Shutdown Temperature (°F or °C)*
tPL** Thermal Purging Limit Temperature (°F or °C),
"OFF" if disabled.
tPt** Thermal Purging Time Delay (minutes), shown only
if tPL is enabled
PC Pump Cycling (ON/OFF)
F-C Temperature units (°F or °C)
*Settings available for adjustment on the 3-digit Aquastat
display only when the "Outdoor Reset Module" is installed.
**Not displayed when connected to an L7248 Aquastat
Control.
***Only displayed when connected to an L7248L Aquastat
Control.
IBC
HL_ High Limit.
Hdf High Limit Differential.
Or_ Pump Overrun Time
otL Outdoor Temperature Low (minimum) parameter for
the outdoor reset curve (°F or °C)
otH Outdoor Temperature High (maximum) parameter
for outdoor reset curve (°F or °C)
btL Boiler Temperature Low (minimum) parameter for
outdoor reset curve
tPL Thermal purging minimal temperature (Parameter is
available only if outdoor temperature is invalid)
tPt Maximal Thermal Purge time (Parameter is
available only if outdoor temperature is invalid)
rSt Reset Lockout
F-C Temperature units (°F or °C)
W8735ER WIRELESS OUTDOOR RESET MODULE
7 66-1202EFS—02