Lorex ACSOL2 Serie Guia De Inicio Rapido página 8

Option A - Installing the solar panel separately
5. Loosen the wall mount's adjustment
ring by turning it counterclockwise
(see Figure 2).
6. Angle the rotating adjustment screw
45° away from the mounting surface
(see Figure 2).
7. Twist the solar panel onto the wall
mount. Be careful not to hit the
mounting surface.
8. Adjust the angle of the solar panel to
receive direct sunlight, then tighten
the adjustment ring.
9. Use a Phillips screwdriver and the
adjustment ring screw to secure the
adjustment ring from underneath the
wall mount (see Figure 2).
ACSOL2_QSG_TRILINGUAL_R1.indd 8 ACSOL2_QSG_TRILINGUAL_R1.indd 8
Adjustment ring
Figure 2
6
2021-04-26 1:46:52 PM 2021-04-26 1:46:52 PM