Filter Cartridge Replacement - Nikken PiMag MICROJET Guia De Inicio Rapido

OPERATION
BEFORE ENTERINg ThE shOwER
1. activate filter by running hot water.
2. COOL TO DEsIRED TEMPERaTuRE BEFORE ENTERINg
shOwER.
3. adjust the shower spray to desired setting by
rotating the exterior ring. There are five settings,
three single and two combination.
MAINTENANCE
1. handheld model only: Remove filter cartridge from
housing, reverse it and reassemble approximately
once per month to ensure proper filtration
performance and water flow.
2. Replace filter cartridge every 6,000 gallons/3 months
(handheld model), or 12,000 gallons/6 months (wall-
mounted model) whichever comes first.

FILTER CARTRIDGE REPLACEMENT

1. unscrew shower head from cartridge housing.
2. Remove used filter cartridge.
3. Insert new cartridge in housing and reassemble.
Replacement cartridge:
#14661 handheld (2 count)
#13831 wall-mount
TROUBLESHOOTING
No water flow
Check the valve on your plumbing to ensure that it is in
open position.
Low pressure flow
Replace MicroJet filter cartridge.