Power Source; Aux In Operation; Bluetooth Operation - Crosley CR3028A Manual De Instrucciones

English

Power Source

1. This speaker could operate either on its internal lithium battery or with the
power adapter.
2. When it is operated by the power adapter, the lithium battery will be charged
at the same time.

Aux In Operation

1. Rotate the ON/OFF-Volume Knob to turn on the wireless speaker.
2. Press the Input Selection Button to select the Aux In mode.
3. Use the 3.5mm aux in cable or the RCA to 3.5mm cable to connect your
audio device to the Aux In Jack of the wireless speaker.
4. Start playing the music from your audio device.

Bluetooth Operation

1. Rotate the ON/OFF-Volume Knob to turn on the wireless speaker.
2. Press the Input Selection Button to select the Bluetooth
3. Turn on the Bluetooth feature of your audio device, search for "Crosley
CR3028" and pair.
4. Once your device is successfully paired with the wireless speaker, you will
hear a short confirmation sound from the speaker.
5. Start playing the music from your audio device
Used as a Power Bank
1. This wireless speaker comes with a 2000mAh lithium battery and could be
used as a power bank for your mobile device.
2. The output DC voltage of the USB port of the speaker is 5V. To use this
speaker's power bank feature, use the USB cable to connect your mobile
device and the speaker.
3. Turn on the power of the speaker and it will start charging your device.
5
mode.