EVGA UV 19 PLUS+ Guía De Instalación Rápida página 3

The Following Resolutions
are Supported:
Resolutions may vary depending on your displays capabilities.
• 800x600, 1024x768, 1280x768, 1366x768,
1280x1024, 1440x900, 1400x1050, 1680x1050,
1600x1200, 1920x1200, 2048x1152
Supported on UV 19 and UV 39
Hardware and Driver Setup:
1 – Power on your Laptop or your monitor and PC to begin
the installation.
2 – Once in Windows, install the UV Plus + drivers from the
provided installation CD. After the installation process has
finished reboot your computer.
3 – Attach your monitor's DVI, HDMI or both connectors to UV Plus+
(a DVI to VGA connector is provided if needed).
4 – Plug in the provided USB cable to UV Plus + and the other
end to your Notebook or PC's USB port. The UV Plus +
software will now detect your attached display.
5 – Right-click the DisplayLink icon in the Windows System Tray to
configure how the attached monitor should display.
A DVI to VGA Adapter is provided to allow a VGA connection
to the UV Plus + DVI connection. A USB Extension cable is
also provided to allow for optimum placement of your UV Plus + .
DVI connection
DVI to VGA Adapter
HDMI connection
English