Detergent - NORSE PROFESSIONAL SK90 Manual De Operación

SK90

Detergent

Surface preparation
Clear the working area and make sure that all windows and doors are closed tightly. Make sure that all
plants and trees adjacent to the cleaning area are protected by a drop cloth.
Initial high pressure rinse
The next step is to spray the cleaning surface with water to clear off any dirt or grime that may have
collected on the surface. If you use detergent, this will allow your detergent to attack the dirt that has
worked its way into the cleaning surface. Before triggering the gun, adjust the nozzle to a wide spray
pattern and slowly adjust to the desired spray pattern. This will help you avoid applying too much
pressure to the surface that could cause damage.
Detergent application
Only use detergents formulated for pressure washers. Test the detergent in an inconspicuous area before
use. Follow the manufacturer's label directions for mixing the correct concentrations of detergent to
water.
1. Unscrew the top of detergent applicator and fill with detergent.
2. Put the top of detergent applicator back on.
3. Attach the detergent bottle to the end of the fixed spray nozzle, click into place.
4. Apply the detergent so it thoroughly covers the cleaning surface. Apply from bottom to top to prevent
the detergent from sliding down and streaking.
5. Allow the detergent to remain on the surface for a few minutes. This is a good time to use a brush to
lightly scrub heavily soiled areas. Never allow detergent to dry on the cleaning surface.
6. Remove detergent bottle from the fixed spray nozzle.
7. Rinse detergent from surface.
8. Rinse the detergent bottle with clean water following each use.
9. Final rinse. Make sure you thoroughly rinse the surface and that all detergent has been removed.
The following cleaning procedure will ensure that you achieve the
most beneficial results in the shortest amount of time. Use the
detergent nozzle to apply detergent. Some cleaning tasks can be
completed with water alone, but for most tasks the removal of dirt
becomes more effective if a detergent is used.
NOTE: Only use mild, environmentally friendly detergents. Never
use aggressive chemicals, abrasive detergents or similar to avoid
damage to your health, the product and the environment.
© NØRSE
English
7