Publicidad
EN
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTUR
REFERENCE
Self-assembly.
Warning! Keep children away from the assembly area.
Leave the plastic bags out their reach. The small parts
pose a choking hazard.
Sleeping size
90 x 200 cm
Maximum Thickness of Mattress indicated by this log
Materials
Structure of bunk bed, storage, drawer and 2 shelves: oak
veneered particleboard white stained and lacquered.
Ladder: solid beech lacquered.
Drawer front and 2 shelves: melamine particleboard
lacquered.
Handles: solid oak white stained and lacquered.
Frames and laths of bedframe: beech plywood.
Assembly instruction
Before beginning assembly, identify all components using
the manual.
In order not to mislead components, do not throw the
packaging before completing the full assembly.
This product must be installed by an adult.
Assemble on a clean, flat surface.Plan to assemble the
cabinet as close as possible to the location of the installa-
tion.
Do not use a power screwdriver as it may damage the
panels.
Over time, fasteners may lose their effectiveness. Regu-
larly check the tightening of the screws. If necessary
tighten.
Recommendations for use
This product is designed for indoor use only.
WARNING! High beds and the upper bed of bunk beds
are not suitable for children under six years due to the
risk of injury from falls.
WARNING! Bunk beds and high beds can present a
serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the
bunk bed that are not designed to be used with the bed,
for example, but not limited to ropes, strings, cords,
hooks, belts and bags.
WARNING! Children can become trapped between the
bed and the wall, a roof pitch, the ceiling, adjoining
pieces of furniture (e.g. cupboards) and the like.
Milk – 06/2017
To avoid risk of serious injury the distance between
the top safety barrier and the adjoining structure
shall not exceed 75 mm or shall be more than 230
mm.
WARNING! Do not use the bunk bed/high bed if any
structural part is broken or missing.
Always follow the instructions given in the instructions.
Ventilate the room sufficiently to maintain a low humid-
ity level and to prevent the appearance of mold in and
around the bed.
Complies with the safety requirements of standard
EN EN 747-1: 2012 + A1: 2015.
Do not jump on the beds.
Do not stand on the beds.
Do not overload the drawer and the shelves.
The wood-based products, particle board, painted,
varnished and / or lacquers may emit an odor when
opened. This smell disappears after a few weeks if the
room is properly ventilated.
Maintenance
Remove dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean
dry cloth.
Mop up spills immediately with a clean, dry cloth.
In order not to damage the surface, it is recommended
not to file a hot object or wet directly.
Do not use magazines or newspapers as a mat. The ink
used may leave traces that can stain permanently the
furniture surface.
To avoid the appearance of marks, not to leave any
stationary object for more than two months.
To avoid scratches, do not use a sponge or recurrent
grain cleaner.
Do not use abrasives.
The use of special products for furniture is not neces-
sary or recommended.
Do not use abrasives.
Maintain with movements in the direction of wood fiber.
Do not place the product near a heat source (radiator,
fireplace ...) nor a moisture source. Heat and humidity
may damage the product.
Keep the label with lot number, it may be useful
in case of complaint.
If you have any comments or suggestions regarding
this product, assembly instructions or service received,
please enquire at your nearest store or contact us on
our website at: www.habitat.eu or write to this address:
HABITAT FRANCE SERVICE CLIENT-42/44 RUE DU
FAUBOURG ST ANTOINE 75012 PARIS-FRANCE
1
Publicidad
