Wehncke 12193 Manual Del Usuario página 21

5. Remove the inflation hose and screw the valve tight.
ATTENTION! Do not overinflate the pool. The air chamber should be filled to its full extent,
however folds should still be visible.
ATTENTION! If you want inflation when the pool has filled water, you must put on the bub-
ble function 2-3 minutes by pressing the „BUBBLE" button first, and then operate accord-
ing to step 2-5 above.
6. Remove the inflation hose from the air outlet and screw the nut tight.
7. Screw the filter cartridge onto the water inlet on the pool wall by turning it clockwise.
8. Fill the pool using a garden hose to fill the pool to the water level printed on the pool wall.
9. Place the cover onto the pool, fasten the zipper.
All manuals and user guides at all-guides.com
21