Maintenance And Cleaning - Graham Field LUMEX LX8000 Instrucciones De Operación Y Asamblea

MAINTENANCE AND CLEANING

• To remove dust and dirt, wipe knee walker gently with a clean, soft, damp cloth.
• To clean, use a clean, soft cloth and a mild soap and water solution, rinse with clear water, then
dry with a soft cloth.
• Inspect wheels periodically for wear or damage. Verify that wheels are free of hair or any other
obstruction to free wheel operation. Inspect caster stems for assembly tightness.
s NOTICE: DO NOT use solvents, abrasive cleaners, or scouring pads to clean this product.
WARNING: Ensure proper function of brakes before each use.
WARNING: If handgrips or brakes are loose, DO NOT USE KNEE WALKER. Contact your
Graham-Field authorized distributor immediately for repair.
WARNING: Inspect the knee walker periodically for proper function and wear. Ensure
locked handle height; check fit and tightness of all nuts, bolts and knobs. If any component
is not in proper working order or appears worn, contact your Graham-Field authorized
distributor immediately for repair and/or appropriate replacement parts.
WARNING: The use of non-Lumex replacement parts will void the warranty, and could
create a hazardous condition resulting in serious personal injury.
SPECIFICATIONS, LX8000 KNEE WALKER
Dimensions
Wheel Diameter
Maximum Weight Capacity
LX8000-INS-LAB-RevA19
Handle Height
Knee Pad
Unit overall
Minimum
Maximum
Height Minimum
Maximum
Length
Width
Length
Width
8"
300 lb, EVENLY DISTRIBUTED
36.7"
40.6"
17.5"
20.5"
14.2"
6.7"
40"
18"
5