Publicidad
Idiomas disponibles
Idiomas disponibles
Number
1
TN panel
2
Post
3
VESA system
4
HDMI
5
Displayport
6
Multifunction MENU / On / Off / Button
7
Current input
12
Name
INSTALLATION
1. Connect the Displayport or HDMI cable from your
computer to the corresponding port on the back of
the monitor (4/5).
2. Connect the power supply cable to the monitor.
3. On: Press the power button to turn on your monitor.
4. Power off: Press the power button to turn off your
monitort.
When the monitor is operating under normal
conditions, the LED indicator light will be green (or
blue); If the monitor is in power saving mode, the LED
indicator light will be red. When the power indicator is
off this means that the monitor is in off mode. Please
disconnect the power cable when the monitor is not
being used.
13
Publicidad
