KMP-04-WR
Back-panel analog time switch
CAUTION
• Make sure to turn the minute knob only in the
direction shown by the arrow. Turning it
backward forcibly may damage the switch.
• Do not try to turn the dial palte if self, you
may cause a malfunction.
• The dial shows the time using a 24 hour
system.
SETTING THE MANUAL SWITCH
• Set the manual switch to the
: The output will be turned on
and off at the set times.
The output Will be on
:
regardless
of
(continuously ON)
The output Will be off,
:
regardless
of
(continuously OFF).
• You can use a manual switch load operation test and please set
to "ON" or "OFF" position.
CAUTION
Please turn it to
the
ssettings
the
settinhs
position after you finished your testing.
position.