Worldcast Systems AUDEMAT FM MC5 Guía Rápida página 5

Input / output pinout:
Analog inputs / outputs
designation
Power connector pinout:
3. Configuration using the front panel application
1. Connect the unit to the power supply.
2. When first activated, a screen will appear on the front panel that will indicate
that initialization is in progress. Please wait for a few seconds.
NOTE: If the cursor does not follow the stylus movement, touch the four
corners of the screen to recalibrate the cursor.
3. Touch the arrow on the bottom right of your screen to display the menu, and
"Network" to access the IP configuration.
Select the settings you wish to modify.
The edit screen is displayed (right screen below): change the IP address if necessary (192.168.17.32 for
instance) by deleting the current value using the "Del" key and entering the new value using the touch screen.
Use "OK" to validate. Note the IP address, you will need it for remote connection.
4. Connecting to the network to access the remote application
!
This unit does not deal with network related security issues. It is up to the user to set it in a secured
environment such as a private network, VPN, behind a firewall...
Connect the Ethernet cable from the unit's network interface to your PC *, or to a router or a switch.
* In case you are using a direct connection, you will need to set an address on the PC in the same range as the IP
address you just set using the front panel application, so both are compatible. Example: if the unit's IP address is
192.168.17.32, the PC address must be in the 192.168.17.xx range.
With Windows 8.1 or 10, click the Start button, and:
➢ Control panel/Network and Internet / Network and Sharing Center.
Signal Pin
number
Analog - 3
Analog + 2
Ground 1
Pin 1
Pin 4
Digital inputs / outputs
Signal
designation
Digital -
Digital +
Ground
Ground
+12 V
Ethernet Cable
English version
Pin
number
2
3
1
5