Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
EmerGen Switch HR Series Rain-proof Door and Hood
RP6 & RP10
INSTALLATION INSTRUCTIONS
Your EmerGen Switch HR series Transfer Switch can be installed outdoor when
fitted with the RP6 or RP10 rain-tight door and hood.
The EmerGen Switch HR must be hard-wired for outdoor installation. Please
refer to the EmerGen Switch Installation Instructions.
Attach door, Hood and Door Latches as shown below. All holes in the EmerGen
Switch must be filled with a screw to prevent water from entering the chassis.
Connecticut Electric
Page 1
1/30/2007
Publicidad
Resumen de contenidos para Connecticut Electric EmerGen Switch HR Serie
- Página 1 EmerGen Switch Installation Instructions. Attach door, Hood and Door Latches as shown below. All holes in the EmerGen Switch must be filled with a screw to prevent water from entering the chassis. Connecticut Electric Page 1 1/30/2007...
- Página 2 Switch. Adjunte la puerta, los seguros de la cubierta y la puerta como se muestra a continuación. Todos los orificios del EmerGen Switch deben tener un tornillo para evitar que el agua entre al chasis. Connecticut Electric Page 2 1/30/2007...