Before Connection - Elta 2311 Manual De Usuario

02-2311-EN 12/2/05

BEFORE CONNECTION

Caution
Turn off the power of all the equipment before making connections.
Read instructions of each component you intend to use with this unit.
• Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with power
cord of speaker cord.
Connection
Positioning of the Speakers
The positioning of speakers differs according to the size and acoustics of the listening room. While actually listening
to a program source, try various speaker positions to determine which layout provides the best surround effect.
Place the speakers connected to "L" to your left, and "R" to your right.
Speaker Connections
Caution
To avoid damaging the speakers with sudden high level signal, be sure to switch the power off before connecting the
speakers.
• Speaker Jacks
Connect the SPEAKER PLUGS to the SPEAKER JACKS located on the rear of the unit.
• Wie How to Connect
RIGHT SPEAKER PLUG: Red jack.
LEFT SPEAKER PLUG: White jack.
1. Plug Right Speaker Cable to Red Speaker Input.
2. Plug Left Speaker Cable to White Speaker Input.
Operating CD
1. Switch to "CD/MP3/WMA" mode, unit will turn "ON" automatically.
2 Press "OPEN" button to open CD door ("-" and present time appears on display).
• Place the disc with label facing up on the disc tray.
• Hold the disc without touching either of its surface position with printed title side facing up, align it with the guides
and place it in its proper position.
3. Close the CD door unit it "Clicks" (Total track number in Disc on display).
4. Press "PLAY" button Disc play automatically.
5. Stopping play.
Press "STOP" button once to stop play.
• If you press the "PLAY" button again, play starts automatically from first track.
Skip and Searching
Next or Back Button:
Press these buttons to go to the previous / next track.
Repeat
The repeat functions that you can enjoy are dependent on the disc types played.
CD: All tracks repeat, single track repeat and given.
1. Press "MODE" key once.
2. LCD will display "REP" = repeat of 1 track.
3. Press "MODE" key again to repeat all.
4. Press "MODE" key again to random mode.
5. Press "MODE" key again to normal playback.
012.
11:09 AM Page 012
SPEAKER
R
L
(RED) (WHITE)