Cleaning The Filter Unit - Brandson Equipment 303370 Manual De Usuario

7. Vacuuming fluids
Mount the fluid attachment to the nozzle of the handheld vacuum cleaner.
Hold the appliance with the fluid attachment facing downwards on the surface to
be cleaned, so that the rubber wiper remains in contact with the surface. Ensure
that you never exceed the maximum fluid quantity of about 120ml! Empty the
dust collector after vacuuming and allow it to dry completely before reusing the
appliance.
Note: Hold the appliance with the nozzle facing upwards if there is fluid in the
dust collector. Never tilt or shake the handheld vacuum cleaner!
8. Cleaning and Care
Disconnect the mains adapter from the socket before cleaning. If you have used
the appliance for vacuuming fluids, you have to empty the dust collector after use
and allow it to dry completely. Clean the product using a slightly moist cloth. To
do this, hold it over a trash bin and open the dust compartment.
Remove the filter from the appliance and empty the dust compartment.

8.1 Cleaning the filter unit

Remove the filter from the appliance. Then remove the filter holder from the
appliance. Clean both parts of the filter unit (filter and filter holder) using a brush.
If more dirt has accumulated, clean it using a vacuum cleaner or using cold or
lukewarm water if necessary. Dry the filter thoroughly before reusing it in the
filter unit!
20
Filter
Filter bracket
English