Setting The Clock Manually - PERFECTPRO TEAMPLAYER Instrucciones De Manejo

Setting the clock manually

Your radio will set its clock automatically using the DAB or FM radio
signal. If no signal is available and you need to set the time manually,
please follow the procedure shown below.
. Press the Power button to switch on your radio.
. Press and release the Menu button until the Advanced menu of
the current mode shows on the display.
3. Rotate the Tuning control until 'System ' appears on the display.
Press and release the Tuning control.
4. Rotate the Tuning control until 'Time' appears on the display.
Press and release the Tuning control.
5. Rotate the Tuning control until 'Set Time/Date' appears on the
display.
6. Press and release the Tuning control. The hour digits will flash
on the display.
7. Rotate the Tuning control to set the desired hour. Press and release
the Tuning control.
8. The minute digits will flash on the display. Rotate the Tuning
control to set the desired minute. Press and release the Tuning
control.
If the radio has been set to use a  hour format, there will be
an option here for setting AM or PM for the clock time.
9. The day will flash on the display. Rotate the Tuning control to
change the day as needed. Press and release the Tuning control.
0. The month will flash on the display. Rotate the Tuning control to
set the current month. Press and release the Tuning control.
. The year will flash on the display. Rotate the Tuning control to
set the current year. Press and release the Tuning control to
confirm the clock setting. The display will show 'Time Saved'
then exit the menu.
GB
36