Tabla de contenido
Publicidad
Introduction
Thank you for purchasing the Ubiquiti Networks®
NanoSwitch
™
through installation and also includes warranty terms.
Package Contents
NanoSwitch
Installation Requirements
Mounting accessories and drain wire are not included.
Pole-Mounting
• Drill with a 4.5 mm Drill Bit
• 7 mm Socket Wrench or Screwdriver
Wall-Mounting
• (2) Screws (≤ 5 mm Screw Head)
• (1) Drain Wire, Optional (≤ 16 AWG, ≤ 40 cm)
Cables
• Shielded Category 5 (or above) cabling with drain wire
should be used for all wired Ethernet connections and
should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
. This Quick Start Guide is designed to guide you
Self-Tapping
Screw
Metal Straps
(Qty. 2)
Outdoor 4-Port PoE
Passthrough Switch
Model: N-SW
Quick Start
Guide
Publicidad
Tabla de contenido
