Technical Specifications - Runpotec RUNPOMETER RM35 Instrucciones De Uso

TECHNICAL SPECIFICATIONS

Display unit
Max. length.
Smallest display value
Cable cross-section
Max. speed.
Measuring wheel diameter
Measuring accuracy
Measurable length
Intended location
Ambient conditions
Protection class
CONFORMITY ASSESSMENT
The RUNPOMETER RM35 complies with the requirements of the Measuring
Instruments Directive MID 2014/32/EU (conformity assessment procedure
with type test according to module B).
EU type examination certificate number A 0445/2020-0.752.468/2021
REQUIREMENTS FOR THE MEASURED MATERIAL
 Round cross-section
 Smooth surface
 No kinks
 
x x
RUNPOTEC GmbH – Irlachstrasse 31 – A-5303 Thalgau
Tel.: +43-6235-20 335 – Fax: DW 35 – office@runpotec.com
Meters (optionally feet)
99999.99 m / 99999.99 ft
0.01 m
min. 2 mm / max. 32 mm
1 m/s
25 mm ± 0.02 mm
Accuracy class III
min. 5 m
open
Temperature:
Air humidity:
Mechanical:
Electromagnetic:
IP 44
 Does not elongate or crush
 Dry and unsoiled
ENGLISH
-10 °C to +40 °C
no condensation
Class M2
Class E1
 
x x
11