EDM 07671 Manual Del Usuario página 12

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
07671
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
JUICER PARTS
1. Engine base
2. Juice cover
3. Small juicer cone
4. Filter
5. Juice outlet
SPECIFIC INFORMATION
1. Place the juicer on a flat and stable surface.
2. Do not use the appliance near hot surfaces.
3. Make sure that no part comes into contact with anything hot.
4. Do not attempt to move the juicer by pulling on the cord. Make sure that the
cable does not get stuck. Do not wrap the cord around the appliance or twist it.
5. Do not use the juicer in case the power cord or plug is damaged, or after a
malfunction or if the appliance has been damaged in any way. Return the juicer to
the nearest authorized dealer for inspection, repair or adjustment.
6. Periodically make sure that the power cord is in perfect condition, with no signs
of damage. In case of damage to the power cable, it must be replaced by the
manufacturer, its trusted establishment or qualified persons / similar entities in
order to avoid risks.
7. Never use the appliance outdoors and always place it in a dry environment.
8. Unplug this apparatus from the wall outlet when not in use and before cleaning
or storing.
9. Save these instructions for later reference.
FUNCTIONING
1. Place the motor base on a smooth and stable surface.
2. Slide the juice jug onto the shaft of the motor base, making sure the jug is
securely in position by turning it clockwise.
3. Place the strainer over the jar.
4. Place the small cone on the drive shaft.
5. Plug the appliance into an electrical outlet.
6. Cut the fruit to be squeezed in half.
7. Press each half firmly on the small or large cone, and the appliance will work
automatically.
NOTE: When using the large cone, it should be placed on top of the small cone.
The appliance is designed to process normal quantities of fruit juices, for domestic
consumption; It can be used without interruption for a maximum of 5 minutes.