Publicidad
Idiomas disponibles
Idiomas disponibles
8. Problemas y soluciones
Trouble
Motor unable running,
Running too Slow, or
Getting hot
Sticking of main
compressor
Terrible shake or
abnormal noise
Pressure insufficient
or discharge capacity
decreased
The oil Consumption
too excessive
Possible causes
(1) Fault in line, or voltage insufficient
(2) Power wire too thin or too long
(3) Fault in pressure switch
(4) Fault in motor
(5) Sticking of main compressor
(1) Moving parts burnt due to the oil
insufficient
(2) Moving parts damaged, or stuck by
foreign body.
(1) Connecting part loosed
(2) Foreign
body
compressor
(3) Piston knocking valve seat
(4) Moving parts seriously worn
(1) Motor running too slow
(2) Air filter chocked up
(3) Leakage of safety valve
(4) Leakage of discharge pipe
(5) Sealing gasket damaged
(6) Valve plate damaged, carbon buildup
or stuck.
(7) Piston
ring
and
damaged
(1) Oil level too high
(2) Breath pipe chocked up
(3) Piston
ring
and
damaged
Remedies
(1) Check the line
(2) Replace the wire
(3) Repair or replace
(4) Repair or replace
(5) Check and repair
Check crankshaft,
bearing, connecting rod,
piston, piston ring, etc,
And replace if necessary.
(1) Check and retighten
got
into
main
(2) Check and clean away
(3) Replace with thicker
(4) Repair or replace
(1) Check and remedy
(2) Clean or replace the
(3) Check and adjust
(4) Check and repair
(5) Check and replace
(6) Replace and clean
cylinder
worn
or
(7) Repair or replace
(1) Keep the level within
cylinder
worn
or
(2) Check and clean
(3) Repair or replace
paper gasket
cartridge
set range
ASL0613
Publicidad
