Flexible Shaft - Populo RTK-107 Manual De Usuario

OPERATION(CONT.)

3. FLEXIBLE SHAFT

The flexible shaft is used for extra length control and fine detailing.
1 Remove the shaft collar.
2 Loosen the collet nut with
wrench after pressing the
spindle lock button and hold.
3 Raise the handle end of
the flexible shaft and shake
gently until the inner
flexible shaft protrudes
from the fitting collar.
4 Insert the flexible inner shaft
into the collet then tighten
the collet nut with the wrench.
5 Screw the flexible shaft
fitting collar onto the
rotary tool.
6 Hold the sleeve on
the flexible shaft,
then insert the lock pin
into the hole of sleeve.
7 Loosen the collet
nut on the side of the
sleeve, then insert shank
of the accessory into
collet then tighten the
collet nut.
8 Pull out the lock pin competely from the hole of sleeve
before starting to work.
NOTE: Before inserting the lock pin into the hole of sleeve,
please ensure the hole on inner movement shaft is aligned with
the hole of the sleeve.