ORIUM QUAELIS 10 Manual Del Usuario página 19

1. Settings buttons.
2. Display of measurement of CO2 concentration in ppm in
the room.
3. Display of the relative humidity of the room.
4. Micro USB charging port for the battery (under the base).
5. Display of the ambient temperature of the room.
6. Battery indicator.
Functions of settings buttons:
Importé par :
-35-
AIC International - 44980 Ste Luce sur Loire - France
ON/OFF functions to switch the meter on and
off.
In standby mode: allows you to change how
the unit of temperature is displayed
(°C/°F).
°C/°F
In configuration mode: allows you to increase
the display value by +1.
In standby mode: allows you to enable/
disable the alarm.
In configuration mode: allows you to select the
ALM
display value to the left.
In configuration mode: allows you to select the
display value to the right .
Allows you to record data.
In configuration mode: allows you to reduce
REC
the display value by -1.
In standby mode: allows you to select the
configuration mode.
In configuration mode: allows you to confirm
and move to the next settings.
Importé par :
AIC International - 44980 Ste Luce sur Loire - France
-36-