Battery Charging - Steren NB-600 NO-BREAK Manual De Instrucciones

3.- Communication interface port
Allow one to monitoring the UPS
through a PC
4.- Outlets
Allows on to plug up to 4 different
appliances
5.- Phone jacks
Allow one to safeguard a phone line
6.- Power cord
Plug the supplied power cord
1.- Plug the UPS into an AC household outlet.
2.- To charge the UPS battery at 90% you must leave it for 8
hours approximately.
3.- After that time, you can start to use the equipment.
Do not plug any device during this time.
18

Battery charging

5
3
4
6