Technical Characteristics - EYEON 160203 Manual Tecnico

The module 160203 is used for control of engine fan coil
EN
traditional three-speed power. The module outputs are Triac,
deliberate choice, both to ensure current protection (given the
characteristics of the triac that the threshold - max 6A - enters the
protection mode) or to cancel the noise of the switching of the
relays at the exchange rate of speed. This form can only be connected
to the thermostat module but not directly to the control room (see
diagram). The module is usually located next to the control unit in the
executive plan for the management of the plan, or in the various electrical
panels according to the services control or management must play.
FEATURES
- ALL CONNECTORS ARE REMOVABLE
- MAINTAINS SETTINGS EVEN IN THE CONTROLLER TURNED OFF
- DIMENSIONS 52X46X73 (3 MODULES)
Outputs
protection
External communication
approvals
Operating temperature
Storage temperature
Relative air humidity

TECHNICAL CHARACTERISTICS

3 triac outputs 6A-230VAC
IP 20
RS485 on RJ11 plug 4/4 or 4-pin
terminal block
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation