Answering Message; Hotline For External Call - Keo Mini Central K208 Manual Del Usuario

Mini Central releases the automatic answering
service (does not drop the call)
In the programmer extension, in programming
mode, press and wait for the
confirmation tone.
In this case, if the user presses a wrong number or
does not dial within 5 seconds after automatic
answering, Mini Central will not drop the call and
will transfer it to the operator extension.
Mini Central releases the automatic answering
service (drops the call)
In the programmer extension, in programming
mode, press and wait for the
confirmation tone.
In this case, if the user presses a wrong number or
does not dial within 5 seconds after the automatic
answering service, Mini Central drops the call.

Answering Message

You must first record a message to activate the
answering service of lines through DISA.
54
Recording DISA message
In the programmer extension, in programming
mode, press and wait for the confirmation
tone, after which you can start recording your
message. Recording time is 12 seconds.
Note: In the event where you have to change the
message, follow the previous procedures. The new
message will automatically substitute the previous
one.
Listening to DISA message
In the programmer extension, in programming
mode, press .
Listening to waiting music
In the programmer extension, in programming
mode, press .

Hotline for External Call

This function enables you to automatically access
a certain external line. For internal access between
extensions or programming, press .